|
|
|
HyperGear Turbocharger Manufacture
|
|
| |
| Products |
|
 |
HyperGear TR43 440HP Turbocharger 4 CA SR RB Engines |
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
TR43 |
|
|
|
|
Product information:
Compressor wheel:
Exducer: 76.2 mm
Inducer: 56.8 mm
Turbine wheel:
Exducer: 74.2
Inducer: 56.6
Manifold flange: T3x
A/R: 0。58
Developed for: SR20DET, RB20DET, RB25DET,RX7 or any other 2L or bigger engines. This Turbo is good for 440HP fly wheels or around 250KWs wheels.
This is a high end performance turbo. The turbo responds is from about 3000RPM depends on engine type. This turbo is designed for track and drag racing. The max recommended boost out put is no higher then 20PSI.
|
|
This item comes with:
10PSI actuator, Rear Dump pipe flange and hollow screw.
Additional: Oil fitting $80, 3inch steel dump pipe $50.
|
|
TR43 Gen II |
|
|
| Please click on photo above to enlarge |
|
|
| photos of our demo car: |
|
Fitted on CA18det with FMIC, 700 injectors, Z32AFM, High flow exhaust, ECU remap, making 230KWs on wheels with 19PSI
The car Engine Dump pipe DynoSheet
Fitted on stock CA18det with high mount manifold running 13PSI with Bosh 040 fuel pump pulling 231HP (174KW) on the wheels.
The car Engine Turbo Dump pipe DynoSheet
This is a dyno chat was from a customer's car. Its a RB25DET Nissan cefiro pulling 214KW at 1 bar boost
Dyno sheet
This is installation out come on a RB20det
Car photo1 photo 2 Turbo photo 1 photo 2 | | | | |
| |
| |
| |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page
